The Right Hardware for Your Hauler
Who knew all it took to get super clean car parts is a touch of heat and some ultrasonic sound waves? Allstar Performance Ultrasonic Cleaners are available in 1- and 5-gallon models. They are ideal for cleaning everything from oily and greasy parts and tools to items with tiny holes and crevices like carburetors and fuel injectors. You can even use them to clean other things around the house like bicycle and mower parts, jewelry, watches, and much more. Other features include heat dissipation holes to eliminate overheating, double fuse protection, and a drainage system for removing dirty cleaning solutions.
Summit Racing Equipment
Wastegate Heat Shield
Reduce under-hood temperatures and the chance of getting burned while working on a hot engine with the new Wastegate Heat Shield (#10142) from Design Engineering, Inc.
Great addition to a DEI Turbo Heat Shield for total turbo system protection, the Wastegate Heat Shield features high-tech composite materials with superior thermal insulating properties to help turbos run as efficiently as possible.
Design Engineering, Inc.
3500 HD Helper Springs
Hellwig Products’ Load Pro-25 Helper Spring Kit (#2518) is a three-leaf helper spring pack with a level load capacity of up to 2,500 pounds. The Load Pro-35 Helper Spring Kit (#3518) is a four-leaf helper spring pack with a level load capacity of up to 3,500 pounds. Both kits feature an adjustable-rate spring with silent-ride polyurethane bushings and Hellwig’s signature hammertone powdercoated finish. The Load Pro-25 and Load Pro-35 kits fit 2WD and 4WD 2020-’22 Chevrolet Silverado and GMC Sierra 3500 HD single-rear-wheel pickups. A Load Pro Mounting Hardware Kit (#25318) is required to install both the Load Pro-25 and Load Pro-35 spring kits and is sold separately.
Hellwig Products Company, Inc.
’66-’77 Ford Bronco Interior
TMI wanted the ’66-’77 Bronco to look better than when it rolled out of the factory, so a full interior kit was developed to make the spunky SUV look its best. TMI developed door panels, quarter panels, a tailgate panel, carpet kit, floor mats and a console. Alongside the new products, TMI dropped in a set of Pro-Series Universal front seats and added a 38-inch bench that just fit perfectly between the rear wheel wells.
Toyota Tundra Valve Springs
Manley Performance has released a special valve spring kit for the DOHC 5.7L 3UR-FE V-8 engine seen in Toyota Sequoia, Land Cruiser and Lexus LX 570 applications. Manley’s new kit (#26205) features a set of 32 valve springs that are wound from an exceptionally pure steel alloy and engineered for use in conjunction with aftermarket camshafts that have lifts to 0.480 inch.
The springs have a 0.990-inch OD and can be used with the factory spring seat. They’re rated at 75 pounds installed and 205 pounds when open. Also included in the kit are lightweight titanium retainers. This allows the engine to achieve up to 10,000 RPM. The retainers are manufactured from heat treated aerospace grade titanium and CNC machined to exacting tolerances. They are designed for use with 5.5 mm stem valves and weigh only 7 grams apiece.
Manley Performance Products, Inc.
Timbren Industries recently introduced spacer kits for pickup truck bumpstops with an aftermarket lift. Spacer kits make it possible for Timbren SES kits to work just as effectively on a lifted truck as they do on trucks with a standard ride height. Customers don’t need to sacrifice towing and hauling performance just because their pickup sits a little higher than stock.
A simple-to-install spacer kit will compensate for the extra height. Here’s how it works: Each spacer kit comes with two 1 inch and two half-inch spacers along with all the necessary hardware to allow customers to mix and match to achieve their desired ride height.
’75-’80 Squarebody Hood Catch
Auto Metal Direct continues to push for the top with even more new products for your Squarebody. Often found only in secondhand situations, AMD felt the need to reproduce this replacement Hood Catch Assemblies for the ’75-’76 Chevy C/K, ’77-’80 Chevy/GMC C/K with inner hood release, and ’77-’80 Chevy/GMC C/K without inner hood release. AMD hood latch assemblies are complete OE style and include all levers, springs, cams, etc. required to secure the hood in place. They do have the ’73-’74 Chevy and ’73-’76 GMC units in development but were not available at time of printing.
Auto Metal Direct