Pypes 2.5-inch stainless steel manifold downpipes are for ’63-’66 GM pickups with small block V-8 engines. These mandrel-bent 409 stainless steel downpipes fit only the factory 2-inch outlet manifolds. They are covered by Pypes lifetime limited warranty.
- 2.5-inch 409 Stainless Steel
- Mandrel-bent 16 gauge
- Designed for factory 2-inch outlet manifolds only
- SBC applications only
- Limited lifetime warranty
The ’20 Toyota Tundra EZ-990 helper springs (Part #976) are a single-leaf design and are rated for 2,000-pound load-leveling capacity. They are designed to maintain level ride height and better overall driver control when the vehicle is loaded. Users can adjust load support as needed with the adjustable U-bolts. The helper springs feature Hellwig’s signature hammertone powdercoat for durability and can be installed using simple hand tools.
Hellwig Suspension Products
FILL ’ER UP
All American Billet and Tre5 Customs teamed up to bring you this all new polished aluminum fuel door. It is originally designed for squarebody Chevy and C10 truck bed floor, and actually follows the contoured ribs in the bed floor. It fits perfectly with the offset fuel filler on a Boyd’s Welding gas tank, so if you’re looking for top notch quality, look no further.
All American Billet
The Pedal Monster is the first OBD-II connected throttle sensitivity controller that intercepts and matches the pedal position signal with the throttle input signal before it reaches the vehicle’s ECM. It is fully customizable with settings for city, sport and track (each with 10 levels of refinement) to make your throttle more or less responsive in a given situation. Pedal Monster does not alter the ECM in any way, making it completely vehicle-warranty friendly.
Capable of withstanding temperatures of up to 1,800 degrees F direct heat and 2,500 degrees F radiant heat, the line sleeves are offered in half-inch and 1-inch inner diameters for all of your underhood wire, line and cable protection needs.
The half-inch ID will fit larger spark plug wires, protecting them from hot exhaust manifolds and headers. Black Titanium Protect-A-Shield is available in retail sizing of 1-inch ID x 3 feet, half-inch ID by 3 feet, and half-inch ID x 6 feet. DEI’s original titanium line sleeves are also available.
Design Engineering, Inc.
Vac ‘N Blo
Equipped with a twin-fan, 4-horsepower motor that generates 130 CFM of airflow, MetroVac’s 4 HP Vac ‘N Blo vacuums are the most powerful car vacuums available. All feature a durable steel canister, a 3- or 6-foot flexible hose depending on the model and a 12-foot cord. You also get two 20-inch extension wands, upholstery and crevice tools, four-piece detailing tool set, dust brush, blower nozzle and inflator adapter. Your choice of vacuums with shoulder strap, with wheels or wall-mountable.
MetroVac’s Evolution handheld vacuums are rated at 500 watts and 70 CFM of airflow, which MetroVac says makes them the most powerful handheld vacuums available. Other features include a steel canister with a satin nickel and black finish, a 12-foot power cord, and crevice and dust brush tools. Some models include a 20-foot flexible hose and a pet brush to get stubborn cat hair off of your favorite chair.
Summit Racing Equipment
Debut of the Mack
Detroit Steel Wheel Co. released a newly designed wheel known as the Mack. This design first debuted on the Mobsteel-built ’74 Dodge W100 and is now available to the public in 18-, 20- and 22-inch sizes. Available in raw steel or powdercoated finished.