Close

1953–1956 Ford F-100 Big Back Window Conversion Guide

Martin Hernandez . November 18, 2026 . How to . Martin Hernandez
Save ArticleLogin to save it

AS SEEN IN OUR OCTOBER 2026 ISSUE – Buy Now!

A Better View of the World

For owners of 1953-’56 Ford F-100 trucks, upgrading from a small back window to a big back window has become a highly sought-after modification that blends style with practicality. The original small rear window, while true to many factory builds, can feel restrictive by today’s standards. In contrast, the big back window option offers a noticeably improved look, giving the cab a more open and proportionate design that stands out at shows and on the road. This change elevates the truck’s classic appeal and enhances the overall driving experience.

One of the biggest advantages of the larger rear window is the increase in natural light inside the cab, making the interior feel less confined and more inviting. Additionally, the expanded glass area significantly improves visibility, helping to reduce blind spots and making driving safer—especially in traffic. While factory big back window cabs are rare and often difficult to find, aftermarket solutions have simplified the process. LMC Truck provides a big back window conversion panel designed to fit existing small window cabs, allowing enthusiasts to achieve this upgrade without sourcing a new cab. With basic tools and some dedication, the transformation can typically be completed over a single weekend.

Window conversion
Here’s the starting point with a small back window in a 1953-’56 cab.
Window conversion
Lay out all of your favorite tools that you may need. It’s a good idea to add a variety for those tough-to-reach areas.
Window conversion
Open your new big back window conversion kit and set it on a workstand. We sourced our kit from LMC Truck.

Mark the lower cut line. Our initial cut will be directly on the body line. Using ¾-inch tape helps make a nice, straight line.

Mark the upper cut line. This line was made ⅛-inch directly below the roof seam.
There is a brace directly below the rear window that needs to be removed. Locate the spot welds on the left and right sides and drill them out with a 5/16-inch drill bit.
Using a cut-off wheel, cut through the entire upper and lower cut lines.
Using a belt sander, grind the spot welds in the left and right door jambs. Only remove the spot welds in between your upper and lower cut lines.
Window conversion
Remove the old panel.

the big back window option offers a noticeably improved look, giving the cab a more open and proportionate design that stands out at shows and on the road.

Grind the spot welds holding the remaining upper flange to the roof skin. Use a panel separator to remove the flange.
Using a rapid strip disc, remove rust and paint from all mating surfaces.
Window conversion
Spray all mating surfaces with a quality weld-through primer.
Window conversion
Test fit the new back window panel.
Window conversion
Mark the bottom of the panel to make a final cut line.
Window conversion
Cut off the remaining section.
Drill 5/16-inch holes to plug weld the new panel in the doorjambs and to the roof skin.
Reinstall the new panel and clamp it in place.

One of the biggest advantages of the larger rear window is the increase in natural light inside the cab, making the interior feel less confined and more inviting.

Window conversion
Plug weld the panel in the doorjambs and to the roof skin.
Window conversion
Tack weld the entire lower seam. Hammer and dolly the seam as you weld to keep the gap tight and flush.
Window conversion
Completely weld the lower seam. Spacing out tack welds and allowing for proper time for the welds to cool are critical steps; otherwise, panel distortion is a possibility.
Grind all welds down as you go and finish with 80-grit on a DA sander.
Window conversion
You have now converted your small back window cab into a much more desirable big back window. At this time it is a good idea to test-fit your glass and seal before going to paint.

 

 

 

You may also like this
X
We value your privacy

We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic. By clicking "Accept All", you consent to our use of cookies. Visit our Cookie Policy for more info.