CAPTCHA Image
Reload Image

CAPTCHA Image
Reload Image

Parts Counter, The Right Hardware for Your Hauler!

Throttle and Kick

Lokar introduces its new Throttle and Kickdown Cable Mounting Brackets for Edelbrock’s Pro-Flo 4 EFI systems, allowing for a clean and simple cable installation. The brackets are available for both early and late versions of the Pro-Flo 4 with 4150 or 3878 throttle bodies, with or without provisions for cruise control, and in Lokar’s Brite or black anodized finishes.

Parts Counter Brackets for Edelbrock’sAll mounting hardware and return assist springs are included. As with all Lokar products, each bracket is designed and manufactured in the USA and comes with a lifetime warranty.

Lokar Products
877-469-7440
www.lokar.com

Next Up On The Parts Counter Bright Broncos

United Pacific continues to illuminate classic Bronco restorations with new Amber LED Parking/Signal lamps for the grille.

The new, super-bright lights are direct replacements for the original components, offer greater visibility than the stock incandescent lamps and complement United Pacific’s range of high-power LED headlamps and taillamps for early Broncos.

Parts Counter United Pacific’s 35 LED ParkingThe 25 LED dual function parking and signal lights replace the original lighting units in the grille of 1966-’68 models, while United Pacific’s 35 LED Parking/Signal lights fit 1969-’77 models—for applications across the entire range of early Bronco models. The lights are sold individually, and they plug in to the stock lighting harnesses for easy installation.

United Pacific
866-327-5288
upauto.com

’58-’59 Fleetside Trim

’58-’59 Fleetside Trim Parts CounterChrome Diecast Fleetside Trim is now available from Classic Parts! This reproduction stainless steel trim set is designed for the ’58-’59 Chevrolet Fleetside trucks. Set includes the two diecast tips, two diecast ends, and the two upper and two lower stainless pieces and clips for installation. They’re originally available on ’59 trucks, but they will work on ’58 trucks.

Classic Parts
800-741-1678
www.classicparts.com

Retro-Fit Power Steering Add-on Kit

Parts Counter Retro-Fit Power SteeringThe factory went to electric power steering on the supercharged LT4 and LT5 engines, so they don’t have provisions to accommodate the hydraulic power steering older vehicles have. Holley’s Retro-Fit Hydraulic Power Steering Add-on Kits make it easy to add a GM Type II power steering pump to the factory serpentine accessory drive system. The design incorporates a splined dual bearing system that takes up the supercharger’s high side belt loads, eliminating stress on the pump’s internal bearings.

Summit Racing Equipment
800-230-3030
www.summitracing.com

We had to list ’73-’78 OE Hood on this Parts Counter list.

Auto Metal Direct’s much-anticipated all new OE-Correct Hood for ’73-’78 Chevy Squarebody trucks, Blazer and Suburban are now available. AMD has redeveloped a full line of premium quality body panels for Squarebody trucks. These panels and trim are always made from premium quality components, just like the OE manufacturers used originally.

Parts Counter ’73-’78 OE HoodMost replacement hoods until now have had the style line in the front, and that is not correct for the ’73-’78 models. AMD has gone the extra mile to pay attention to these details and turn out an OE-correct, superior quality hood. Has excellent fit and finish and  EDP coated to protect against rust and corrosion prior to installation. AMD offers the hood hinges and gaskets as well.

AUTO Metal Direct
877-575-3586
www.autometaldirect.com

’21 Ford F-150 Lift!

BDS Suspension is excited to announce 4-inch and 6-inch lift kits for the ’21 Ford F-150. Kit is to improve on-road handling and off-road capability.

Available as standard strut spacer IFS systems or FOX 2.5 factory series coilover systems, BDS takes the new Ford F-150 to the next level with clearance for 35- to 37-inch tires. At the heart of these new lift systems, a pair of specially designed quarter-inch thick laser cut high clearance crossmembers maximize clearance and provide a solid mounting point for the OE lower control arms.

Parts Counter BDS SuspensionAll kits come finished in a durable textured black powdercoat and are sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS’s No Fine Print Warranty, ESC System compliance and a five-year, 60,000-mile drivetrain warranty to match the dealer.

BDS Suspension
517-279-2135
bds-suspension.com

Last, On Our Parts Counter Is Pro SBC Camshafts

Pro SBC Camshafts Parts Counter Summit Racing’s Pro SBC hydraulic roller cams for 1987-2002 Gen I small bock Chevy engines use the latest lobe design to open the valve much faster and hold it open for a longer period of time. This permits a bigger air/fuel charge to enter the combustion chamber for more power. Made from American-made steel billets and are available in four  performance levels.

Summit Racing Equipment
800-230-3030
www.summitracing.com

 

FOLLOW ON INSTAGRAM