From SEMA trucks to best of show winners at most events around the country, you’re bound to see a GSI logo welded into the frame rails of the top built trucks on the planet. Although like almost any great business in this amazing country we call home, the road to respect wasn’t always so smooth. The team at GSI International has been designing and fabricating parts for classic trucks and cars since the shop opened in 2000. Their team is passionate about hot rods and custom cars with a mission to channel that passion into creating quality products. To support the growing demand of their highly engineered products, they officially launched GSI Machine & Fabrication in 2015 specializing in Chevy C10 air-ride suspension. Now they offer a full line of products for classic trucks and shipping to both domestic and international customers.
Along with their own amazing line items, GSI is also an authorized dealer for Accuair, Budnick Wheels, CPP, Currie Enterprises, Ridetech and Wilwood. If you are looking for an air ride suspension for 1955 – 1987 SquareBody Chevy, head online and check out GSI after you join us on this behind the scenes tour. Let’s go!
GSI Machine and Fabrication
6925 W. Frye Rd
Chandler, AZ 85226
GSI’s 15,000 square-foot manufacturing facility in Chandler, AZ supports their entire team of experienced product designers and machinists. Engineers, machinists, and fabricators all work in the same building, and our design team proudly overlooks the shop floor. All of GSI’s products are proudly Made In The USA from start to finish.
We love pulling up to a manufacturing facility and seeing a clean bagged squarebody out front!
Before any fabrication begins, the crew at GSI will get as much information from you as possible to get an accurate quote together. They know every build is unique, so make sure to fill out as much information about your build that you can. It will help us get an accurate quote together so we can help you build the truck of your dreams.
GSI uses a ENSIS Series uses AMADA’s fiber laser cutting system to process both thin and thick materials without a cutting lens change or manual setup.
88 U.S. tons is how much force this Amada RG-M2 8024 Press Brake brings to the techs at GSI.
GSI’s core competencies are machining all sizes and styles of castings and billet materials. Their engineers and programmers use Solidworks and GibbsCam software to design a variety of products.
It’s not hard to see why a GSI full chassis with coilover suspension starts at $15,250. Owners of a 1955-1987 truck should be eager to swap their frame rails to one of these full coilover chassis.
A wide range of patented technologies, fabricated parts, and innovative capabilities instill confidence in GSI’s ability to design, develop and create.
There’s always something cool going on at the shop and this visit was no let down. THis 4-door c10 is going to be amazing!
The full chassis’s price for Air Ride Suspension is $13,500. The following products are included with the 1955 to 1987 Full Chassis with Air Ride Suspension:
- Front Airlift D2600 Airbags
- Rear Firestone 9000 Airbags
- Boxed Sheet Metal Control Arms
- GSI Tie Rod Adapter Kit
- GSI Chassis Stiffener
- Billet Watts Link
- Notch and Bridge
- Frame Rails
- Upper and Lower Ball Joints
- Carrier Bearing Mount
- Mustang II Steering Rack (Aftermarket premium Flaming River Steering Rack available)
- SB Engine Mounts (LS Engine Mounts available to add)
- Axle Housing
Again if you are interested in purchasing a full chassis from GSI Machine and Fabrication for your 55-87 GM, GSI is here to help you any way we can so don’t hesitate to reach out!