ALL THE LATEST PARTS FOR C10 TRUCKS

Deluxe Bench Seat

TMI Products recently debuted this 60-inch Deluxe Bench Seat with an all-new design that took more than two years to develop. It combines the best qualities of a bench seat mixed with the comfort and functionality of bucket seats along with a center console and a storage area.

 The Deluxe Bench was in response to customer requests for a bench seat that had all the functionality, comfort and storage of a pair of bucket seats with a console. Now you can get the best of both worlds. Bolstered bucket-style seats that, with one quick flip, turn into a three-person bench seat.

 TMI Products INC
888-460-0640
www.tmiproducts.com

 Hoodt Hinges and Latch

If you are tired of messing with your hood latch and rusty hinges that either stick open or closed, check out these pieces of hardware from Holley Classic Trucks. Made just like OE with thick gauge steel and EDP coated to prevent rust and corrosion, these new hinges and latches have the strength you need to have confidence in a securely fastened hood.

Available for:

1981-1987 Chevy/GMC C/K Trucks
1981-1991 Blazer/Jimmy/Suburban

 Holley Classic Trucks
866-464-6553
www.holley.com

 73-91 C30 Flip Kit

Drop your Chevy or GMC C30 with this all-new kit from Western Chassis. If you want a lower stand on your 1973-’91 Chevy or GMC C30, this rear axle flip kit and C-notch will secure an 8-inch drop in the back.

Available for:

• Combined kits available
• Strongest relocator available
• Versatile heavy-duty U-bolt plates
• Reinforcement C-sections
• Strongest design in the industry
• Grade 8 hardware included
• Easy installation
• High quality powdercoat finish

 Western Chassis
866-406-4926
www.westernchassis.com

 Fender to Cowl Seal

The automotive aftermarket continues to embrace the Squarebody as new parts and accessories are introduced on an ongoing basis. Auto Metal Direct has recently introduced new fender-to-cowl seals for your truck. Manufactured from premium-grade materials, these seals are direct replacement for your factory units. Help eliminate wind noise inside the cab and prevent debris from collecting inside at the door hinge pillar with AMD’s new fender-to-cowl seals.

Auto Metal Direct
877-575-3586
www.autometaldirect.com

 Hot Adhesive

Now with even greater holding strength, DEI’s high-temperature Spray Adhesive is perfect for installing heat and sound control solutions, as well as materials like foam, fabric, metal and wood, in automotive interior and related projects.

This improved formula makes for a very aggressive, high-build, pressure-sensitive adhesive designed to bond to most substrates with a tack time of only 2 to 4 minutes. It’s heat resistant up to 200 degrees Fahrenheit, and it dries quick and clear, is California compliant, and is made in the USA.

Design Engineering, Inc
800-264-9472
www.designengineering.com

 SS Diecast Round 2!

If you are a M2 Machines Chevrolet Square Body casting collector, you are going to want to keep an eye out at your local Walmart in the USA. The second Square Body Syndicate Collection has shipped and is starting to arrive in stores now. The collection consists of six standard castings, two chases and one super chase. Arriving in Walmart stores now!

Squarebody Syndicate
www.squarebodysyndicate.com

 Billet for your Bow Tie

Eddie Motorsports hood hinges for ’67-’72 Chevy trucks are a stunning billet alternative to old stock hinges. They come ready to install as an easy bolt-on application that is completely made in the USA.

Features:

• Available in seven different finishes
• High strength, precision billet aluminum construction
• Utilizes sealed bearings and stainless-steel nitrogen gas struts (included)
• Bolt-on application for steel or fiberglass (specify when ordering)

 Eddie Motorsports
888-813-1293
www.eddiemotorsports.com

 MicroSquirt

Stronger fuel injection drivers power the new MicroSquirt ECU update from tuning experts AMP EFI/DIYAutoTune. Called AMP’d MicroSquirt, the unit also features a protected crank input for engines triggering from a coil negative. The upgrades allow tuners to easily enable spark outputs or fit Hall effect and optical sensors without the need to wire-in external resistors.

Features:

• Available in seven different finishes
• High strength, precision billet aluminum construction
• Utilizes sealed bearings and stainless-steel nitrogen gas struts (included)
• Bolt-on application for steel or fiberglass (specify when ordering)

 AMP EFI
844-841-4156
www.ampefi.com