Up next FULL event coverage from Last Resort 2022 Published on March 16, 2023 Author Damien Davis Share article Facebook 0 Twitter 0 Mail 0 Right hand Drive, Bagged and Bodied 1988 Isuzu P’up! One Bad Dog We all enter the scene in many different ways. Some grow up in a family building cars and trucks, and some are introduced by friends. Scott Harms is no exception; he was introduced to the scene by a friend. Back in 1992, Scott’s pal took him for a ride in a lowered Mazda truck, and Scott became instantly hooked. At that time, he owned a 1988 Ford Ranger. This was not a truck for his future plans; his dad sold the Ranger and they went to the Isuzu dealer and bought a 1993 Isuzu pickup. Subscribe to our weekly newsletter Home from the dealership, Scott and his dad cranked down the torsion bars in the front and mono-leafed the rear with 3-inch blocks. Years later and many cars and trucks in between, Scott came across a fully built Isuzu P’up that he always wanted. He had the support of his wife, Jessica; she said, “Go get it before it’s gone.” DOWN, BOY! Since Scott is a dog breeder, it was only fitting for him to call his truck “P’up Money,” a great little play on the Isuzu P’up and his occupation. Scott had to add his own touches to make it even better. Ashley and Daniel Callahan, the truck’s original builders, fabricated a custom ¾ frame built from 2×3 square and round tubing. Everything on the frame was smoothed and painted to match the truck. On the front suspension, they used Michigan Metal Works control arms with Slam Specialties SS6 ’bags. Ashley and Daniel narrowed the rearend 3 inches and used a 4-link with Slam Specialties SS6 ’bags. They went all out by converting everything over to right-hand drive. The couple then performed a stock floor body-drop, laying the rockers flat on the ground. The rollers consists of 20×8.5 Raceline Commanders with 245/35/R20 Toyo Tires. In the engine bay, the stock 2:3-liter motor was upgraded with wrapped Pacesetter headers and Flowmaster exhaust. Ashley and Daniel also added sheetmetal details, all Rhino-lined to match. ROBO-DOG On the outside, everything was shaved and smoothed. A full phantom grille with Toyota front bumper was installed, as well as flush-mounted LED taillights. Originally, Ashley and Daniel had painted the Isuzu PPG Electric Blue. Then Joseph Carpentier bought the truck and decided to change things up, adding a biomechanical theme to the back of the Isuzu. Joseph then sold it to Scott, who wanted to take it to the next level. With the help of Feltham Fabrication and Forbidden Customs, the biomechanical graphics were added to the hood and onto the dash and top of the doors inside. Yep, Scott definitely took his truck to the next level. Ashley and Daniel made sure the interior was as detailed as the rest of the truck. To start, they added a Toyota T-100 60/40 bench seat wrapped with two-tone light-gray vinyl with dark-gray inserts. They also added Dakota Digital gauges with an Ididit steering column with a Billet Specialties steering wheel. Custom door panels and kick panels were made to match. Although this was already an incredible interior, Scott put his own touches on it by having Feltham Fabrication strip the dash and paint the truck’s inside with biomechanical paint, continuing the theme on top of the doors. Lastly, a Pioneer head unit with 5 ½-inch components and a 200-watt Pioneer amplifier were added to control the music. The stock 2:3-liter motor was upgraded with wrapped Pacesetter headers and Flowmaster exhaust. BEST IN SHOW Scott took a fully built custom truck and made the sort of changes that make you say, “WOW.” Be sure to check out Scott’s truck at shows all over the Southeast along with his club, Acrophobia. Scott would like to thank Jessica Harms for making his dreams become reality, and Phil Martin, Justin Steed, and Jason Feltham for always being willing to lend a hand with the rebuild. Owner Scott Harms 1988 Isuzu P’up Iva, South Carolina Acrophobia CHASSIS Engine: 2.3L, Pacesetter headers, Flowmaster exhaust with Coffin muffler, motor painted to match. Sheetmetal details Front Suspension: Michigan Metal Works control arms, Slam Specialties SS6 ’bags Rear Suspension: Slam Specialties SS6 ’bags, two Viair 480 compressors, ¾ frame built from 2×3 square and round tubing, 4-link, Toxic Shocks BODY & PAINT Exterior stock floor body-dropped to the rockers PPG Electric Blue Sierra Silver Nissan Charcoal HOK Orion Silver Biomechanical HOK Kandy Teal airbrush Shaved body Color-matched frame INTERIOR Toyota T100 60/40 split bench seat Two-tone light-gray vinyl with dark-gray inserts Dakota Digital gauges Custom door and kick panels Custom-painted dash and top of doors in biomechanical theme Ididit steering column with Billet Specialties steering wheel Pioneer head unit 5 ½-inch Pioneer components 200w Pioneer amplifier WHEELS & TIRES Wheels: 20×8.5 Raceline Commander Tires: 245/35/R20 Toyo
1969 Dodge | PROJECT CORKSCREW QA1’s Cool 1969 Dodge D100 Sweptline Plucked from obscurity, Corkscrew lived out the first 50 years of its well-loved life as a work truck at […] Chris Hamilton October 12, 2021 Department Editor HEADLINE How to Industry News Latest Profiles Tech Uncategorized
The New 2022 GMC Sierra Is A Game-Changer — And Here's Why! ( https://tfl-studios.com/ ) Check out our new spot to find ALL our content, from news to videos and our podcasts! Welcome back to TFL Talkin’ […] Adam Johnson January 07, 2022 Department Industry News Latest Press Release Product Reviews Profiles Truck Reviews Uncategorized
1938 Dodge pickup | SKR8PN! Multiple Builders Add Their Skills to This Trophy-Winning Showstopper 1938 Dodge pickup Names SKR8PN! Building a show-winning custom truck is always a challenge. It demands […] Joe Greeves August 26, 2021 Department Editor Features Latest Profiles Reader Rides
Toyota Tundra | To Slam or Not to Slam How to be a Baller on a Budget Our first thought was to build this gigantic truck with 20-inch wheels on 37s and create a […] TOM GOMEZ September 01, 2021 Department Editor How to Latest Tech Truck Reviews