Close

Black Diamond: A Custom 1955 Ford F-100

Mike Alexander and Michael J. Phillips . November 17, 2026 . F100 Builders . Grant Cox
Save ArticleLogin to save it

Pressure Forms Perfection

It’s often said that good things come to those who wait. Those with good things, however, know that waiting doesn’t mean sitting by idly doing nothing. Rather, waiting includes careful planning, preparation, flexibility and a whole lot of hard work. Take, for example, the process by which a diamond is formed. The formation of diamonds can take well over a billion years, but the process is by no means a relaxing one. It takes innumerable tons of pressure and ultra-high temperatures to produce these precious gems.

1955 Ford F-100

Few members of the F-100 community understand this kind of waiting better than Butch Rodgers. He and his ’55 F-100 have spent nearly half a century together. Butch has enjoyed customs and hot rods for most of his life, thanks in part to his father, Pop Rodgers, who was a well-established drag racer in southeast Alabama. Pop, Butch and his brother Gene built race cars for the Fly Boys of Fort Rucker for the better part of Butch’s upbringing. In 1974, Butch moved to Pensacola, Florida, where he met his wife Debbie. The two made regular road trips to Butch’s home in Alabama, and it was on one of these memorable trips that Butch spied the ’55 peeking out of a junkyard. In typical junkyard fashion, Butch and his brother Gene hooked up the truck behind Gene’s car and Butch steered the truck all the way home as he sat on a milk crate.

1955 Ford F-100

The Rodgers boys got started by dropping in a 351 Cleveland and restored the F-100’s power steering. They gave the mismatched body panels a quickie paint job, and Butch had himself a daily driver. More than once Butch pulled his ’55 back into the garage for a smattering of updates, but the most serious phase of the build process started in 1993. It took more than two decades to finish, however, with a few setbacks along the way, but Butch never gave up on his beloved project and stayed the course. The final product is a fully realized dream build in which Butch and his family can delight for decades to come.

1955 Ford F-100

He began the process in 1993 with a full chassis teardown. Each of the body panels was removed and dipped in an acid treatment. The frame was boxed and sandblasted to strip all of the original surfaces down to clean, bare metal. Butch added a Fat Man Mustang II front-end conversion kit to modernize the chassis. The system uses an independent front suspension comprised of tubular A-arms and air ride suspension. The rear deploys an air ride in conjunction with a 4-link suspension. The combination of the boxed frame, updated suspension geometry and air ride allows the classic truck to drive like a modern muscle car. It cruises with yacht-like confidence, devouring all of the twists and curves that back roads have to offer.

The custom Dakota Digital gauge cluster looks killer both day and night.

Keeping Butch’s ’55 planted on the pavement is an equally updated formula of wheels, tires and brakes. To start, the truck is hunkered down on Budnik Rocker wheels. The forged rollers feature a deep lip and full polish finish. Under the front fenders, the rockers measure 20×8.5 inches, while the rear measures 2 inches taller and gained 1 ½ inches of width for a final dimension of 22×10. The ultra-tough wheels are paired with equally capable rubber wrapped in Nitto 555 Extreme performance tires, 275/35ZR20 front and 285 rear. Wilwood brakes are precision fit behind each wheel. The front is stopped by monstrous 16-inch rotors and six-piston calipers, while the rear uses four-piston calipers clinging to 13-inch rotors. All of this bulletproof stopping power is put to excellent use.

A Ford Performance 460 V-8 powers the ’55. The 5.7L monster is good for 525 hp from the factory. The motor features stainless-steel valves and roller rockers and breathes in deeply through a Weiand Stealth intake manifold/Holley 750-cfm combo. The V-8 exhales through ceramic-coated Sanderson headers and a custom 3-inch stainless exhaust system that ends in twin Magnaflow mufflers. Electronics include a Mallory distributor and an American Wiring harness. Cooling is handled by a custom aluminum radiator fabricated by CJG. The power plant is mated to an E40D automatic transmission supported by a US Shift Quick transmission cooler. Power travels down the length of a custom driveshaft to the Ford 9-inch rearend equipped with 3.70:1 gears.

1955 Ford F-100

Exceptional bodywork wraps up the advanced suspension, aggressive wheels and roaring powertrain. The dazzling black exterior really sets off Butch’s Black Diamond, but despite the gleaming results, the road to finishing the exterior was a bumpy one. His original plans included a modest chop to the cab for a classic hot-rod look. His plans were foiled, however, when the first shop that attempted the chop failed miserably. Nearly defeated by the massive setback, Butch had to put his project on hold. Prioritizing his role as a father, Butch put his two sons through college while patiently waiting to pick up his project where he left off.

The end result is a masterpiece of hot-rodding, combining bespoke craftsmanship and raw, powerful engineering. ”

More than 20 years later, a second shop attempted the chop using a donor cab. Not only did the second shop damage the body even more, but the crew botched pancaking the hood. Despite these failures, the shop was able to overhaul the suspension, exhaust, fenders and transmission cross member. Their shining work is apparent in the factory fenders, which were widened 2.5 inches. They also beautifully routed the exhaust out through the running boards. The final stance achieved by the widened fenders, air ride suspension and Budnik wheels is clean and menacing.

Crimson stitched guts paired with modern conveniences from Vintage Air, Kenwood, Lokar, Budnik, Flaming River and others all add to the elegance and modern performance of this diamond.

For a final attempt at a finished cab and hood, Butch reached out to Lonny Moore’s Rod Shop. Lonny had built a ’55 that Butch admired, and the crew was able to complete the majority of the work now visible on Butch’s F-100. They tracked down a second donor cab and hood for Butch’s project, and having no desire for a third surprise, Butch opted not to chop. Lonny’s Rod Shop expertly re-pancaked the hood, removing body filler as thick as an inch in some places. They also customized the truck’s drip rails for a cleaner appearance, gapped the doors and hood to perfection, and narrowed both bumpers. The truck’s front end features a customized 1955 grille, fitted with 1957 Fairlane headlight assemblies. Once the bodywork was finished, it was draped in Axalta G9900 paint that shines with a crystalline clarity. Final touches to the truck’s exterior came by way of a beautiful, polished oak bed fitted with hidden hardware and stainless-steel strips.

The staggered Budnik Rocker billet wheels fill the modified and stretched 1955 F-100 fenders to perfection.

The ’55’s interior is outfitted with refined components to keep up with the rest of the build. Its dashboard was completely smoothed and paint-matched to the exterior. The ashtray and glovebox were removed and molded. Housed on the dash are Dakota Digital gauges, a Kenwood head unit and custom vents fed by a Vintage Air Gen II AC system. The Budnik billet steering wheel mounted on a Flaming River steering column offers a beautiful focal point in the cab. The E40D transmission is fitted with a Lokar shifter. The custom-upholstered seats are buckets from a 300M trimmed in crimson leather, and the custom center console and door panels were stitched to match.

1955 Ford F-100

Butch’s ’55 required patience and sometimes what seemed like interminable waiting, but while he waited he planned carefully, remained flexible and worked tirelessly. The end result is a masterpiece of hot-rodding, combining bespoke craftsmanship and raw, powerful engineering. More than that, it’s a tangible memory. Butch, Gene and Pop spent years building hot rods together, and a small piece of every single one lives on in this build. The experience he gained turning wrenches as a kid, the sweat he put in as a young man, has all come full circle in this perfectly completed passion project. It’s the kind of passion that sets a build like this apart from the rest—the kind that it takes to create a diamond.


TECH SPECS

Butch Rodgers
1955 Ford F-100
Pensacola, FL

Engine

  • Ford SVC 460 with March performance-style track
  • Stock heads with stainless valves and roller rockers
  • Custom valve covers by Lonny Moore’s Rod and Customs
  • Weiand Stealth intake manifold/Holley 750 cfm
  • Mallory Unilite ignition
  • American Wire wiring
  • Sanderson ceramic-coated headers
  • 3-inch stainless Magnaflow muffler
  • Ford E40D transmission
  • US Shift Quick transmission controller
  • Lokar shifter

Chassis & suspension 

  • Stock frame boxed
  • Fat Man Mustang II front end
  • Ford 9-inch/3.70:1 rearend
  • 4-link with air ride
  • Wilwood 13-inch rear brakes with four-piston calipers
  • Fat Man IFS with air ride, front
  • Wilwood 13-inch front brakes with six-piston calipers
  • Rack-and-pinion steering

Wheels & Tires

  • 20-inch Budnik Rockers front and 22-inch Budnik Rockers rear
  • 275/35ZR20 Nitto front and 285/35ZR22 Nitto rear

Body & Paint 

  • Custom drip rails, tucked and narrowed front and rear bumpers
  • Steel fenders widened 2 ½ inches
  • Pancaked hood
  • Custom 1955 grille with 1957 Ford Fairlane headlamp assemblies
  • Dennis Carpenter bed with custom MAR-K tailgate supports and latches
  • Custom aluminum 18-gallon gas tank
  • Lonny Moore’s Rod and Customs bodywork and paint
  • Axalta G9900

Interior & Stereo 

  • Smooth dashboard; ashtray and glove box removed
  • Dakota Digital gauges
  • Vintage Air AC
  • Kenwood stereo
  • Budnik steering wheel
  • Flaming River steering column
  • Chrysler 300M buckets with custom center console
  • Crimson upholstery

 

X
We value your privacy

We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic. By clicking "Accept All", you consent to our use of cookies. Visit our Cookie Policy for more info.