Features

Stinky Pinky: A Nissan Hardbody That Steals the Show

By Jessica Howell

November 16, 2026

AS SEEN IN OUR STREET TRUCK Sept 2026 ISSUE – Buy Now!

Six Months to Glory

Some trucks are built to blend in. Others are built to make people stop mid-conversation, pull out their phones, and ask, “Who owns that?” Brandy Culpepper’s 1997 Nissan Hardbody, better known as Stinky Pinky, falls squarely into that second category. Finished in a wild Tamco Piss-Off Pink Pearl topped with candy purple and BMW silver lace graphics, this Hardbody doesn’t whisper for attention; it grabs it with both hands.

Built in just six months with an estimated budget of around $30,000, Stinky Pinky wasn’t thrown together overnight. Brandy and David Culpepper put in the kind of long shop hours every custom truck builder knows all too well. Racing against the clock before MiniNats meant plenty of late nights, but when you’ve got a goal in sight, you just keep turning wrenches until the job’s done.

The body is clean and smooth without going overboard. A T-Rex Phantom grille, Dapper Lighting LED projector headlights, Pathfinder mirrors, a shaved tailgate handle, and a GrantFab roll pan all work together to sharpen the Hardbody’s factory lines. Around back, clear taillights finish things off, while the bright pink paint and lace graphics make sure nobody mistakes this truck for anything else. According to Brandy, that’s exactly what makes it special—the combination of the bold pink finish and intricate lace work is what sets Stinky Pinky apart from the crowd.

Pop the hood and you’ll find the factory 2.4L four-cylinder still doing its job, dressed up with a candy purple powdercoated valve cover and billet accessories. Stainless long-tube headers feed a custom 2-inch exhaust that exits out the rear, proving you don’t always need a V-8 swap to build a truck people remember. Sometimes keeping it simple and doing it right is the better move.

Underneath, the suspension is every bit as custom as the paint. Dominator 2500 airbags ride on custom upper and lower control arms, bag brackets, and a C-notch, while Koni shocks help keep everything under control. Out back, a custom candy purple triangulated four-link with R-joints lets the truck lay frame flat. Boyd Deuce Ninja wheels wrapped in Yokohama rubber finish the stance, while a Soulless Innovation stainless fuel cell with a stock pump keeps things fed.

Brandy says there aren’t many shortcuts when you’re building a reliable custom truck, and Stinky Pinky proves that point.

Inside, the custom bench seat trimmed in Relicate tan leather by Mike Watson gives the cabin a clean look, backed up by custom door panels with Billet Specialties window cranks, a Flashpower full-wrap billet steering wheel, and a Skar Audio and Infinity sound system.

Brandy says there aren’t many shortcuts when you’re building a reliable custom truck, and Stinky Pinky proves that point. Start with a solid platform, put in the hours, learn new skills along the way, and don’t be afraid to build something that stands out. Judging by the crowds this Hardbody draws everywhere from Eastbound Getdown to Terminal Takeover to Southern Tradition, that advice has paid off in a big way.

TRUCK SPECS

Engine & Drivetrain

2.4L Nissan Inline-4 Factory EFI Stainless long-tube headers Custom 2-inch rear-exit exhaust system Candy purple powdercoated valve cover, billet accessories 1997 Nissan transmission Custom 9mm pistol shift knob

Chassis & Suspension

Custom upper and lower control arms, bag brackets, and C-notch Air Lift Dominator 2500 airbags with Koni shocks all around Custom triangulated four-link with R-joints All suspension components powdercoated candy purple Soulless Innovation stainless fuel cell with stock pump

Wheels, Tires & Brakes

18×8 Boyd Deuce Ninja wheels Yokohama tires Slotted and drilled front rotors

Body & Paint

Tamco Piss-Off Pink Pearl with candy purple and BMW silver lace graphics T-Rex Phantom grille Dapper Lighting LED projectors Clear taillights Pathfinder mirrors Shaved tailgate handle GrantFab roll pan

Interior

Custom bench seat Relicate tan leather Upholstery by Mike Watson, Columbus, GA Flashpower full wrap billet steering wheel Skar Audio and Infinity audio components 6.5-inch components in the dash and doors Custom door panels Billet Specialties window cranks Billet rearview mirror