Interior Damping Kit
’88-’98 GM Truck/SUV

Design Engineering, Inc. now offers a custom-cut solution specifically for 1988-’98 extended-cab GM pickups. Using a combination of proven 2mm damping material and Under Carpet Lite to control heat and block unwanted road, tire and engine noise, the kits are an easy, affordable way to cruise your classic truck in style.

DEI insulation kits are CNC-cut for a precise fit and easy installation:

  • Insulation Kit (#50023)
  • Damping Kit (#50022)
  • Roof Insulation Kit (#50299)
  • Roof Damping Kit (#50300)

Design Engineering, Inc.

’06-’08 Ram Flowmasters

This Flowmaster FlowFX cat-back exhaust system for the 2006-2008 Dodge Ram 1500 pickup truck with the 5.7L V-8 is manufactured using durable 409 stainless steel throughout. It features 3-inch to 2.5-inch mandrel bent pipes for better exhaust gas flow and a FlowFX “straight through” muffler for an aggressive to moderate sound level and maximum performance. All necessary hardware for an easy installation that you can do at home is included.


OBS Under Bed Step Notch

This React Suspension under bed notch gives the extra clearance needed on those extreme drops. With 2 to 2.5 inches of extra room over most other notches, you can enjoy a better ride. Overall, it has 4.75 inches more height than a stock frame. Made from 3/16-inch steel and double plated, it has the strength as well.

Pro Performance


  • Made from 3/16-inch steel
  • Allows 4.75 inches more over an un-notched frame
  • 2 to 2.5 inches more room over most other notches

’73-’87 Squarebody Back Cab Panel

AMD has completed development on all-new tooling and now offers complete OE-style replacement panels with the same shape, curves, bends, and contours just like original. They’re produced to the same gauge thickness as premium quality automotive-grade steel and EDP coated to protect against rust and corrosion.

Auto Metal Direct

20-inch Steel Wheels

These two-piece wheels can take a beating and won’t bend or crack if you hit a pothole. They are paint-ready and come in a wide variety of bolt patterns and backspacing options to help you get a great custom look.

Summit Racing Equipment

’63-’72 C10 Truck Grounded Chassis

Total Cost Involved is proud to offer a new and complete 1963-1972 Chevrolet C10 Grounded Chassis! These brand-new frames include all new front and rear airbag suspension that, when aired out, allow you to lay the frame on the ground with 29-inch-tall front and rear tires. Fully aired up, the chassis boasts a max ground clearance of 8 inches with minimal camber change, and when aired down provides that aggressive 4-inch ride height that everyone wants.

Widened front frame rails allow more room for headers and steering components, and a narrowed rear frame section allows for outboard-mounted shocks and wider tires. The front consists of a trusted and track-proven Pro Touring IFS system. Coilover mounts are replaced with airbag mounts, and then outboard shock mounts are added to accept the Ridetech single adjustable shocks. Heavy duty tubular control arms, 1-inch anti-sway bar, and rack-and-pinion steering along with custom modular spindles provide plenty of brake options.

The center section is a direct carryover from TCI’s Pro Touring chassis. This 12-piece center section keeps the frame from twisting no matter how much horsepower you throw at it, while still leaving plenty of room to run a 3-inch-diameter exhaust.

Fully boxed frame rails are stepped up 8 inches and C-notched to accommodate that extra low, slammed stance. Extra-long and beefy 1¼-inch 4-link bars are coupled with Currie Johnny Joints to aid in unbound articulation, offer less pinion angle change during suspension cycling, and minimize forward movement of axle centerline at full compression. All of this is suspended by rollover sleeve style Firestone airbags and Ridetech single adjustable shocks.

These C10 Grounded Chassis come fully plumbed with ¼-inch stainless air lines along with 3/16-inch brake lines and hoses. Just add your own air management system to complete the build.

All TCI Engineering products come with a six-year, 60,000-mile warranty on wear and tear items such as bushings and ball joints, and a lifetime warranty on any item built in house by TCI Engineering such as link bars, control arms, spindles, and crossmembers!

Total Cost Involved Engineering, Inc.