C10 Builders Guide

Here are the latest aftermarket parts now available for Chevy C10 trucks!

By C10 Builder’s Guide Staff

June 23, 2020

Swap in a Box

Back in the olden days, doing most engine swaps required a lot of work before you even turned a wrench. It’s a different world today. Swap kits are readily available for putting all sorts of engines into all sorts of vehicles. Take Trans-Dapt’s Swap-in-a-Box Complete Engine Swap Kits. Trans-Dapt got together with Hedman Headers and Hamburger’s Performance Products to engineer kits that make engine swaps easy-peasy.

Many kits also include a transmission crossmember and mount pad for an automatic or manual transmission. But the biggest choice you’ll have to make is which headers you want—shorty, mid-length or full length; steel, stainless steel, silver or black ceramic-coated; primary diameter.

Summit Racing Equipment www.summitracing.com 800-230-3030

10,000 RPM!

The new Auto Gage 3¾-inch Pedestal 0-10,000 RPM Tachometer with Shift Light provides great performance at a great value. Available in black (model #233908) or silver (model #233909), these tachometers have been engineered to be easy to read with dial incandescent lighting featuring bright, distinctly illuminated numbers.

The new Auto Gage tachometers are compatible with most 4-, 6- and 8-cylinder engines, electronic ignitions, and most 12V high-performance racing ignitions.

AutoMeter Products, Inc. www.AutoMeter.com 866-248-6356

High Caliper

Wilwood Disc Brakes announces new high-performance floating D52-R racing calipers built specifically for the racing industry. The D52-R caliper is built using a forged aluminum Type III hard anodized body with a 2.75-inch or 2.38-inch stainless steel piston. Weighing only 4.3 pounds, the D52-R caliper provides a lower deflection rate and high-volumetric efficiency when compared to current heavier-cast models. The caliper fluid inlet port is centered directly behind the piston, eliminating interference with the slide pins. Caliper mounting uses the original GM stock height and offset. Fits common 11.75-inch or 12.19-inch (up to 12.50-inch) diameter rotors and a choice of 0.81-, 1.00- or 1.25-inch rotor width.

MSRP starts at $172.76 for the caliper and $4.47 for the slide pins.

Wilwood Engineering www.wilwood.com 805-388-1188

Go-Spark Ignition

FiTech EFI is excited to extend its ignition offerings with the new Go-Spark CD Ignition. The all new Capacitive Discharge Ignition will deliver high-powered sparks from idle to top rpm to improve the combustion event and power output of your engine.

The Go-Spark CDI was designed for both EFI equipped or carbureted engines and features a microprocessor to manage the spark delivery. The ignition, which is assembled in the USA, produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture.

FiTech EFI www.fitechefi.com 951-340-2624

Tuff Stuff

Tuff Stuff Performance High Torque Gear Reduction Starters deliver enough torque to turn over engines with compression ratios of up to 15:1, but are compact and lightweight to make the most of limited engine space.

They’re smaller than OE starters but feature a 3-horsepower motor that draws half the amps of a full-size starter motor. The adjustable mounting block gives you the extra room you need to clear headers, oil pans and chassis components, and the clocked billet aluminum drive end lets you reposition your starter as you add upgrades. Ball bearing construction makes for quiet, reliable cranking, and copper band field coils keep your engine from overheating.

Tuff Stuff gear reduction starters are available in triple chrome-plated, zinc-plated and powdercoated finishes. Summit Racing carries High Torque Gear Reduction Starters for most engines, including:

Summit Racing Equipment www.summitracing.com 800-230-3030

22-inch Torq Thrust

You’ve been asking for it and American Racing has listened. The timeless Torq Thrust II is now available in 22-inch for Chevy trucks. For years, the cast one-piece version of the Torq Thrust II has been a popular wheel in 18- and 20-inch sizes. New for 2020, the 22-inch is available in 22×9 and 22×11 and in either a polished finish or chrome. Like all American Racing wheels, the Torq Thrust II comes with a lifetime structural warranty.

American Racing www.americanracing.com

Four-Link Suspensions

KP Components four-link suspensions for ’63-’87 Chevy C10s are now available! This newest group of parallel four-link suspensions improve the handling and stance of your Chevy C10 or GMC pickup with the choice of three different spring configurations to best suit your project. All three suspensions are available with a Panhard bar or watts link locator for use with GM 10- or 12-bolt, or Ford 9-inch rearends.

KP Components www.KPcomponents.com 888-388-0299