C10 PARTS SHOPPING WITH AUTO METAL DIRECT

Your One-Stop Source for All Chevy C10 Models

Never has it been easier and more convenient to build a custom Chevy C10 than right now. That’s right—tracking down basic replacement parts, as well as those elusive, hard-to-find pieces is now as easy as sitting in front of the computer (or cell phone) and placing an order for whatever it is needed for your truck project. There’s no need to scour the local swap meets or boneyards to find what you need. Actually, you don’t even have to get off your couch to get the parts delivered right to your door. What a time to be alive!

To make your life even better than ever, Auto Metal Direct has not only ramped up production on the necessary parts C10 builders everywhere need to take their trucks to the next level, but the company has also maintained an OEM specs or better level of quality on all its products, which is no small feat these days. From replacement exterior bolt-on pieces, gaskets and seals to body panels, sheetmetal, interior parts and a whole lot more, AMD will be sure to have what you need for your truck.

We wanted to get a better idea of just what AMD has to offer the C10 builder community, so we reached out to AMD insider, Jason Chandler, for a rundown on some of the most popular parts on the company’s website. Now, we knew going in that the list of products would be deep, much more than we could ever feature here, but what he shared with us was a comprehensive assortment of parts that all hobbyist and professional truck builders search for on a very regular basis (including part numbers to make ordering that much easier on your end).

Without any further delay, go ahead and dive into this list of AMD parts, take some notes and then log on to www.autometaldirect.com to place an order. Surely, you’ll find what you need for your C10 project and beyond as AMD offers a wide selection of products for other make and model trucks as well.

Bumber and brakets

’63-’66 Chevy / GMC C/K Trucks Chrome Front Bumper (#100-4063-1)

AMD bumpers are made from heavy-gauge steel and feature OE-quality chrome finish. All parts feature (depending on application) correct holes for turn signals or backup lamps. Installation is fast and easy as all parts are designed to be a direct bolt-on utilizing OE bumper brackets and hardware. AMD bumpers are available for ’47-’99 GM full-size trucks and SUVs, and are covered by a five-year limited rust-through warranty.

’83-’91 Chevy/GMC Squarebody Truck and SUV Chrome Front Bumper (#100-4083-1)

AMD offers an expansive range of quality chrome bumpers, and Squarebody trucks are no exception.This bumper is specific to the popular OE style without impact strip holes and is a direct replacement for your old, rusted, beat up bumper. Check out AMD’s full line of chrome bumpers to find the one you need.

’73-’80 Chevy/GMC C/K Truck and SUV Front Bumper Bracket Set (#105-4073-S)

AMD has been busy over the last few years with its Squarebody product line. The newly developed front bumper bracket set is aimed to be a premium version and is as close to OE as you can buy. This four-piece set replaces factory brackets that are oftentimes found damaged from years in the elements and is a great way to easily improve the front end of your Squarebody.

Grills and core support

’73-’80 Chevy/GMC C/K Truck and SUV Lower Grille Panel (#115-4073)

 (1980 models with round headlight only)

This reproduction lower grille/bumper filler panel is top quality just like the rest of AMD’s premium parts lineup for Squarebodys. Made to OE standards, this panel fills in the space between the bottom of the grille and top of the bumper. This premium version is the same gauge steel as original equipment. The crisp stamping is the closest you can get to a factory piece, and it will work with the standard trim or drill three holes. Use the wider Silverado trim and headlight bezels for ’79-’80 trucks.

’73-’80 Chevy/GMC C/K Truck and SUV Lower Grille Panel Brackets (#152-4073-L / R)

This bracket connects the fender and core support to the lower grille panel/bumper filler mentioned above. With AMD’s all-new tooling, this reproduction lower grille/bumper filler panel bracket is made to meet OE standard quality.

’73-’80 Chevy/GMC C/K Truck and SUV Hood Latch Catch Support Brackets (#326-4073, #326-4075, #326-4077-1, #326-4077-2)

AMD has gone the distance and made each version of these hood latch catch support brackets just like originals. Each piece is stamped from high-quality heavy gauge steel and features the correct shape, size, bends and holes like OEM. These brackets are EDP-coated to help protect against rust and corrosion prior to installation, and are especially nice to have when doing a front end conversion.

Hood Catch & Support Hardware Kit (#X326-4073-S)

Designed for ’73-’78 Chevy GMC C/K Squarebody Pickup, Blazer, Jimmy and Suburban models, this six-piece hardware kit will mount the catch and support to the body. AMD has a huge offering of factory correct, OEM quality hardware for your project truck.

’73-’74 Chevy/GMC C/K Pickup and SUV Premium Radiator Support (#350-4073-1)

AMD has developed OE-correct radiator core supports that are year-specific for Chevy and GMC C/K trucks. Until now, the only offering was a multi-year version that didn’t really fit any truck correctly. AMD solved that problem with its all-new premium versions stamped from high-quality OE gauge steel on new tools. AMD premium core supports feature the correct shape, size, bends, holes and braces, like original, and are EDP-coated to help protect against rust and corrosion.

’75-’80 Chevy / GMC C/K Pickup and SUV Premium Radiator Support (#350-4075-1)

AMD’s reproduction OE-style radiator core support for the ’75-’80 Squarebody C/K Pickup, Blazer, Jimmy and Suburban is correct for use on models with round headlamps only. Stamped from high quality OE gauge steel on new tools, AMD’s premium core supports feature the correct shape, size, bends, holes and braces like original, and is EDP coated to help protect against rust and corrosion.

’80 Chevy/GMC C/K Pickup and SUV Premium Radiator Support (#350-4080-1)

Reproduction OE-style radiator core support for the ’80 Chevy and GMC Squarebody C/K Pickup, Blazer, Jimmy and Suburban models with square headlamps only. Stamped from high quality OE gauge steel on new tools, AMD’s premium core supports feature the correct shape, size, bends, holes and braces like original, and is EDP coated to help protect against rust and corrosion.

’81-’88 Chevy/GMC C/K Pickup and SUV Premium Radiator Support (#350-4081-1)

Reproduction OE-style radiator core support for ’81-’88 Squarebody C/K Pickup, Blazer, Jimmy and Suburban models with single headlamps only. Stamped from high quality OE gauge steel on new tools, AMD’s premium core supports feature the correct shape, size, bends, holes and braces, like original, and is EDP coated to help protect against rust and corrosion.

’81-’88 Chevy GMC/C/K Pickup and SUV Premium Radiator Support (#350-4081-2)

Reproduction OE-style radiator core support for the ’81-’88 Chevy and GMC Squarebody C/K Pickup, Blazer, Jimmy and Suburban models with dual headlamps only. Stamped from high quality OE gauge steel on new tools, AMD’s premium core supports feature the correct shape, size, bends, holes and braces like original, and is EDP coated to help protect against rust and corrosion.

’81-’91 Chevy/GMC C/K Pickup and SUV Hood Latch Support (#326-4081-1)

Reproduction hood latch support for ’81-’91 Chevrolet/GMC Squarebody C/K Pickup, Blazer, Jimmy and Suburban models. Made like OE, each piece is stamped from high quality steel, and EDP coated to help protect against rust and corrosion.

’81-’91 Chevy/GMC C/K Pickup and SUV Frame to Radiator Core Support Mounting Bracket (#349-4081-2)

Reproduction frame to radiator core support bracket for ’81-’91 Chevrolet/GMC Squarebody Pickup Truck, Blazer, Jimmy and Suburban 2WD models only. Each bracket is stamped from high quality heavy gauge OE-quality steel on new tools and features the correct shape, size, bends and holes, and EDP coated to help protect against and corrosion. Two brackets required per vehicle and are sold individually. Also available for ’73-’80 models (#349-4073-3).

’73-’80 Chevy/GMC C/K Pickup and SUV Upper Grille Mounting Panel (#151-4073-1)

Reproduction upper grille mounting panel for ’73-’80 Chevy/GMC C/K Squarebody Trucks, Blazer, Jimmy and Suburban models without inside hood release. This panel mounts at the top of the radiator support, filling in the opening between the top of the grille and the radiator support panel.

’77-’80 Chevy/GMC C/K Pickup and SUV Upper Grille Mounting Panel (#151-4077-2)

Reproduction upper grille mounting panel for ’77-’80 Chevy/GMC C/K Squarebody Trucks, Blazer, Jimmy and Suburban models with inside hood release. This panel mounts at the top of the radiator support, filling in the opening between the top of the grille and the radiator support panel.

’74-’80 Chevy/GMC C/K Pickup and SUV Hood Pop-Up Spring (#303-4073-3)

Reproduction hood pop-up spring for ’74-’80 Chevrolet/GMC C/K Squarebody Pickup, Blazer, Jimmy and Suburban models. Each spring features the correct shape, size and spring rate as OE piece. We strongly recommend this item to anyone replacing their hood or as a replacement for an old worn out or missing original part.

’80-’00 Chevy/GMC C/K Truck and SUV Hood Adjustment Bumper (#305-4082-1)

Each of these hood adjustment bumpers for various ’80-’00 GM car and truck models, are made from factory specification molded rubber and are sold individually. Order as needed specifically for ’82-’87 Chevy/GMC C/K Squarebody Truck, Blazer, Jimmy and Suburban models.

’73-’74 Chevy C/K Pickup Grille Mounting Brackets (#152-4073-1P)

Reproduction grille mounting brackets for ’73-’74 Chevrolet C/K Squarebody pickup, Blazer and Suburban. Features the correct shape, size, bends, holes and curves as OE, and sold as a pair.

’83-’88 Chevy C/K Pickup and SUV Grille Emblem Bowtie (#999-4083-1)

Reproduction Bowtie grille emblem for the ’83-’88 Chevrolet Squarebody C/K pickup, Blazer and Suburban. This emblem is correct for use on models equipped with the chrome trim package. Each emblem is manufactured from high quality materials on new tools and features the correct shape, size, color and trim like original. Includes mounting nuts.

’64-’66 Chevy C/K Pickup Grille Assembly (#150-4064-1)

Reproduction grille shell with Chevrolet letters for the ’64-’66 Chevrolet full-size C10, C20, C30, K10, K20 and K30 trucks. Each grille features the correct shape, size, bends, tabs, holes and chrome finish, and the Chevrolet lettering is the correct shape, size, script and color just like original equipment.

’73-’74 Chevy C/K Pickup and SUV Grille Assembly (#150-4073-1)

Reproduction OE-style grille with foil Bowtie emblem for ’73-’74 Chevrolet C/K trucks, Blazer and Suburban. Each injection-molded grille features the correct shape, size, bends, tabs, holes and Argent Gray color like original. Foil Bowtie logo emblem is the correct shape, size, script and color too. These grilles also hold your Hot Wheels perfectly and makes a great display.

’83-’84 Chevy C/K Pickup and SUV Grille Assembly (#150-4083-11)

Reproduction OE-style grille with emblem mount for ’83-’84 Chevrolet Squarebody C/K C10, C20, C30, K10, K20 and K30 pickup, Blazer and Suburban models with single headlamps only. Each injection-molded grille features the correct shape, size, bends, tabs, holes and Argent Gray color like original. Premium cast Bowtie emblem is available separately (#999-4083-1).

’85-’88 Chevy C/K Pickup and SUV Grille Assembly (#150-4085-22)

Designed for ’85-’88 Chevrolet Squarebody C/K C10, C20, C30, K10, K20, K30 pickup, Blazer and Suburban models with dual headlamps only. Each injection-molded grille features the correct shape, size, bends, tabs, holes and Argent Gray color like original. Premium cast Bowtie emblem is available separately (#999-4083-1).

Seals and Gaskets

’81-’91 Chevy/GMC C/K Pickup and SUV Front Fender to Cowl Seal (#251-4081-2L / R)

Reproduction front fender to cowl seal for ’81-’86 C/K and ’87-’91 R/V Chevy GMC Squarebody pickup truck, Blazer, Jimmy and Suburban. Also known as a sound insulator, this seal installs on cab/cowl and is meant to reduce wind noise and prevent debris from getting stuck between the cab and the rear of the front fender.

’67-’72 Chevy/GMC C/K Pickup and SUV Front Door Beltline Window Felts (#582-4067-1S)

Premium reproduction beltline window felt kit with black bead for ’67-’72 Chevrolet/GMC C/K pickup, Blazer, Jimmy and Suburban. These are the black style beltline moldings that mount with the pre-applied clips on the left and right doors to sweep the inside and outside of the door glass. Contains four pieces.

’73-’76 Chevy/GMC C/K Pickup and SUV Front Door Beltline Window Felts (#582-4073-S)

Premium front door beltline window felts for ’73-’76 Chevy/GMC C/K Squarebody pickup truck, Blazer, Jimmy and Suburban. These seals mount at the bottom of the front side windows and are designed to seal the glass from weather while also helping to reduce window rattling.This is the only technically correct set of beltline window felts for ’73-’76 models on the market. Others sell one set to fit all ’73-’80 models, which is incorrect. The ’73-’76 version is slightly wider top to bottom and the clips are different. This four-piece set includes inner and outer seals built to OE specs.

’77-’80 Chevy/GMC C/K Pickup and SUV Front Door Beltline Window Felts (#582-4073-1S)

Premium front door beltline window felts for ’77-’80 Chevy/GMC C/K pickup, Blazer, Jimmy and Suburban. These seals mount at the bottom of the front side windows and are designed to seal the glass from weather while also helping to reduce window rattling. Technically correct for ’77-’80 models, this four-piece set includes inner and outer seals built to OE specs.

’81-’91 Chevy/GMC C/K Pickup and SUV Front Door Beltline Window Felts (#582-4081-1S)

Premium front door beltline window felts for ’81-’87 Chevy/GMC C/K Squarebody pickup and ’81-’91 Blazer, Jimmy and Suburban. These seals mount at the bottom of the front side windows and are designed to seal the glass from weather while also helping to reduce window rattling. This four-piece set includes inner and outer seals built to OE specs.

Interior Component

’64-’66 Chevy C/K Pickup Glovebox Door (#461-4064)

Reproduction glovebox door for ’64-’66 Chevy pickup trucks. Stamped from high quality steel on new tools, each piece features the correct shape, size, bends, curves and holes like original. EDP-coated to help protect against rust and corrosion. Hinge sold separately. Also available in chrome.

’67-’72 Chevy/GMC C/K Pickup and SUV Glovebox Door (#461-4067)

Reproduction glovebox door for ’67-’72 Chevrolet/GMC C/K pickup, Blazer Jimmy and Suburban. Stamped from high quality steel, it can be painted to match. Hinge and stop are not included; hinge sold separately. Also available in chrome.

’73-’91 Chevy/GMC C/K Pickup and SUV Glovebox Door (#461-4073)

Reproduction glovebox door for ’73-’86 C/K Squarebody and ’87-’91 R/V pickup, Blazer, Jimmy and Suburban. Made like OE, each glovebox door is stamped from high quality heavy gauge steel and features the correct shape, size, bends, curves and holes. Arrives EDP coated to help protect against rust and corrosion.

’73-’91 Chevy / GMC C/K Pickup and SUV Glovebox Liner w/ A/C (#461-4073-2)

Reproduction glovebox liner for ’73-’86 Chevy GMC Squarebody truck C/K pickup and ’87-’91 R/V pickup, Blazer, Jimmy and Suburban. Correct for use on models with air conditioning and made to meet OE standards, each glovebox is made from high quality injection-molded ABS plastic for an authentic fit and appearance. Includes built-in door hinge. Also available for non-A/C trucks (#461-4073-1)

’81-’88 Chevy C/K Pickup ”Silverado” Dash Emblem (#999-4081-41)

Reproduction Silverado dash emblem for ’81-’87 Chevy Squarebody C/K trucks. This emblem attaches to the dash trim panel on the passenger side, and features the correct shape, size, and exterior finish as OE. This is the lower profile design unlike some that sit out farther from the dash. Mounting nuts included.

’81-’91 Chevy/GMC C/K Pickup A-Pillar Panel – Upper (#373-4081-L / R)

Designed for ’81-’91 Chevy GMC C/K Squarebody pickup trucks, Blazer, Jimmy, and Suburban, this is the panel on the A-pillar that is directly next to the windshield. Made of injection-molded ABS plastic, this panel features the correct shape, size, holes, grain and texture like original. Arrives in a black finish but can be painted to match any interior color.

’81-’91 Chevy/GMC C/K Pickup A-Pillar Panel – Lower (#447-4081-1L / R)

Made for ’81-’91 Chevy GMC C/K Squarebody pickup trucks, Blazer, Jimmy and Suburban, this is the panel on the A-pillar that is directly next to the dash that connects the trim between the upper A-Pillar panel and the kick panel. Made of injection-molded ABS plastic, this panel features the correct shape, size, holes, grain and texture as original. Arrives in a black finish but can be painted to match any interior color.

’75-’91 Chevy / GMC C/K Pickup Kick Panels (#447-4075-1R)

Premium reproduction kick panels and air vent bezels for ’75-’91 Chevy GMC Squarebody C/K pickup truck and ’75-’91 R/V Squarebody pickup truck, Blazer, Jimmy and Suburban. Installs on the RH passenger side. Features the correct shape, size, holes, grain and texture like original, and arrives in a black finish but can be painted to match any interior color. Check out AMD’s website for a full listing of all new premium interior panels.

’78-’87 Chevy/GMC C/K Pickup Door Sill Plates (#445-4078-P)

Premium door sill plates sold as a pair for LH driver and RH passenger sides. These OE style textured decorative plastic coverings fit at the door entrances on ’78-’87 Chevy/GMC C10, C20, C30, K10, K20 and K30 Squarebody pickup trucks, and are a direct factory replacement for C/K trucks. Easily paint these to match your factory interior color or customized interior colors. Sold as a pair or individually.

’73-’91 Chevy/GMC C/K Pickup; SUV Horn Buttons

Reproduction center steering wheel horn buttons with Chevrolet and GMC logos for ’73-’91 Chevrolet and GMC C/K pickups, Blazers and Suburbans. Made like OE on new tools, each piece is manufactured using injection-molded plastic and features the correct grain like original. Check out the full selection of horn buttons at Auto Metal Direct’s website.

Body Panels and Sheetmetal

’67-’71 Chevy/GMC C/K Pickup Front Door Shell (#500-4067-L / R)

Stamped from high-quality OE gauge steel on new tools, AMD’s premium door shells feature the correct shape, size, bends, holes, curves and braces like original, and are EDP coated to help protect against rust and corrosion. A ’72 version is available as well.

’77-’91 Chevy/GMC C/K Pickup and SUV Premium Front Door Shell (#500-4077-1L / R)

Reproduction door shell for ’77-’87 Chevy/GMC Squarebody C/K pickup and ’77-’91 Blazer, Jimmy and Suburban. Stamped from high-quality OE gauge steel on new tools,  AMD’s premium door shells feature the correct shape, size, bends, holes, curves and braces like original and are EDP coated to help protect against rust and corrosion. These are the closest to original you can buy on the market. OE correct available for the ’73-’76 models.

’67-’72 Chevy/GMC C/K Pickup Cab Corners (#480-4067-L)

Each reproduction cab corner for ’67-’72 Chevy and GMC C/K trucks is stamped from high-quality heavy gauge steel and features correct as original bends and body lines. Arrives EDP coated to help protect against rust and corrosion.

’60-’66 Chevy/GMC C/K Pickup Inner Big Back Window Conversion Panel (#665-4060)

Designed for ’60-’66 Chevy GMC C/K pickup trucks, this highly requested panel is a direct insert with the existing panels and will save you time and money converting your small window truck over to the desirable big back window configuration. No more searching junkyards to convert your truck. AMD offers this conversion panel developed on all new tooling. Made to OE specs, this big back window conversion panel is constructed of heavy gauge steel and has all the same bends, curves and dome light provisions like original.

’60-’66 Chevy/GMC C/K Pickup Roof Skin (#600-4060)

Reproduction roof panel skin for ’60-’66 Chevrolet/GMC Fullsize C10 – K30 trucks. Stamped from high quality heavy gauge steel, each roof panel features the correct shape, size and curvature like original. Like all AMD parts, this roof skin arrives EDP coated to help protect against rust and corrosion.

’58-’59 Chevy/GMC Fleetside Pickup Front Bed Panel (#715-4058-2)

Reproduction front bed panel for ’58-’59 Chevy/GMC C/K trucks. Correct for all models equipped with a fleetside bed. Stamped from high-quality OE gauge steel on new tools, each front bed panel features the correct shape, size, holes and lines like original. Arrives EDP coated to help protect against rust and corrosion.

Chevy/GMC C/K Pickup – Shortbed & Longbed Fleetside Premium Bedsides OE Style

These bedsides for ’73-’91 Chevy/GMC C/K shortbed and longbed Fleetside model trucks feature the correct year-specific fuel filler doors where applicable and accommodations for the earlier trucks with the wedge style tailgates.

Stamped from high-quality OE gauge steel on new tools, each bedside is assembled on our new robotic assembly line and features the correct shape, size, bends, holes, body lines and braces like original. Arrives EDP coated to help protect against rust and corrosion. Whether you have the round gas hole, dual tanks, longbed or shortbed, AMD has you covered with a full range of bedsides for fleetside trucks.

’79-’87 Chevy/GMC C/K Pickup and SUV Premium Gas Tank Filler Door (#724-4073-1)

These reproduction gas tank filler doors for ’79-’87 Chevy GMC Squarebody C/K pickup and ’79-’91 Blazer, Jimmy and Suburban are stamped from high-quality OE gauge steel on new tools. AMD premium filler doors feature the correct shape, size, bends, mounting holes and braces like original, and come EDP coated to help protect against rust and corrosion.

’67-’72 Chevy/GMC C/K Fleetside Pickup Bed Wheelhouse – 4 inches wider (#760-4067-4P)

Custom 4-inch wider wheelhouse for ’67-’72 Chevrolet/GMC Fleetside trucks, ’69-’72 Chevy Blazer and ’70-’72 GMC Jimmy. Installation of this custom item will require modification to the truck’s bed floor. Each wheelhouse will arrive EDP coated to protect against rust and corrosion. AMD also makes the OE replacement tubs for the purist. Sold as a pair or individually, order the same wheelhouse for LH and RH sides.

’73-’91 Chevy/GMC C/K Fleetside Pickup, Blazer and Jimmy Bed Wheelhouse – 4 inches wider (#760-4073-4P)

New from Auto Metal Direct, 4-inch wider wheelhouses for ’73-’87 Chevy GMC Fleetside truck and ’73-’91 Chevy GMC Blazer and Jimmy. Like all Auto Metal Direct parts, this wheelhouse is stamped from high-quality, heavy gauge steel that is then EDP coated to protect against rust and corrosion. Fits both the driver and passenger side—two are required per vehicle. Sold as a pair, as well as available individually.

Installation of this custom wheelhouse requires cutting / modification to the rear bed floor. Dimensions: 43 x 16 x 12.5 inches / inside width is 13.5 inches.

’81-’87 GMC C/K Fleetside Pickup Tailgate (#925-4981)

This tailgate with “GMC” letters for ’81-’87 Chevrolet/GMC C/K Fleetside pickup is stamped from 18-gauge, OE-quality steel on new tools. Each premium tailgate features the correct shape, size, bends and holes like original and is EDP coated to help protect against rust and corrosion. AMD offers a full line of tailgates for ’47-’91 Chevy and GMC trucks, both fleetside and stepside.

’87 Chevy/GMC C/K Pickup – Shortbed Truck Gas Tank and Sending Unit (#890-4087-16 / #881-4087-32)

This tank for the ’87 Chevrolet and GMC C/K Pickup is correct for use on shortbed models equipped with a gasoline engine with electronic fuel injection (EFI) only. This tank is not for use on diesel applications. Made like OE, each tank features the correct shape, size, bends, curves, holes and exterior finish like original. Ships complete with fuel sending unit lock ring and gasket, and utilizes 1 5/8-inch inner diameter filler pipe. Correct for use on driver or passenger side, as required. AMD offers a full line of gas tanks and sending units for ’47-’91 Chevy and GMC trucks and SUVs.